MR imaging of short T2 components with three dimension ultrashort echo time double echo pulse sequence:investigation of factors affecting imaging quality

Objective To investigate the effect of imaging parameters and postprocessing methods on the quality of MR imaging of short T2 components with 3D ultrashort TE (UTE) double echo pulse sequence. Methods 3D UTE double echo pulse sequence was performed on dry human femoral specimen and the tibial diaphyses, knee joints, and tendons of ankles of a group of healthy volunteers. To investigate the effect of different trajectory delays of the imaging system(-6, -3, -2, - 1,0, 1,2, 3 s), different flip angles(4°, 8°, 12°, 16°, 20°, 24°), different TEs (0. 08, 0. 16, 0. 24, 0. 35 ms)and different postprocessing methods(difference imaging of subtracted volume and non-volume UTE)on the 3D UTE MR imaging quality, the SNR and CNR were calculated and compared, and the artifacts of the images were analysed. Results The cortical bone, periosteum, tendon and meniscus showed high signal intensity on the images of UTE pulse sequence. The best SNR was acquired with 2 s trajectory delay. The best flip angle was 8° to 12° for the human UTE imaging in vivo. The highest CNR was obtained from the TE of 0. 08 ms. The longer the TE was, the more artifacts appeared. The SNR of difference imagewas improved when image subtraction was performed afer multiplanar reconstruction (MPR) of the primary double echo images.Conclusions The short T2 components show high signal intensity on the MRI of 3D UTE double echo pulse sequence. The imaging quality can be improved by shortening TE, using appropriate flip angle and performing subtraction for difference image after MPR of the primary double echo images. Key words: Magnetic resonance imaging; Image processing,computer-assisted