Quantum well lasers emitting between 3.0 and 3.4 μm for gas spectroscopy
2012
The 3 to 4 μm range had long appeared inaccessible to quantum well lasers made on GaSb. Despite having excellent
performance in the 2 to 3 μm range, GaInAsSb/AlGaAsSb quantum well lasers rapidly show their limits when crossing
the 3 μm barrier (the highest wavelength reached with such a device was 3.04 μm under cw operation at 20°C). This
situation was all the more regrettable because several gases have their strongest absorption lines in the 3 to 4 μm range:
methane, for example, has a peak of absorption at 3.26 μm overhanging a weaker peak at 2.31μm by a factor 40.
Works carried out in the University of Munich in 2005 gave new hopes to the world of laser diode spectroscopy. By
replacing the quaternary AlGaAsSb barrier by a quinary AlGaInAsSb barrier, researchers were able to reach laser
operation at 3.26 μm and room temperature in the pulsed mode. Since then, several teams have engaged in the objective
of reaching cw operation at room temperature with such structures. We will give an insight into the phenomena
responsible for the increase of threshold current with growing wavelength. Finally, we will present results obtained with
a monomode DFB laser diode emitting at 3.37 μm having a threshold current of 140 mA at 18°C.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
14
References
0
Citations
NaN
KQI