Solid Polymer Electrolytes from Copolymers Based on Vinyl Dimethyl Phosphonate and Vinylidene Fluoride

Solid polymer electrolytes are prepared by mixing various amounts of lithium bis(trifluoromethanesulfonyl)imide with poly(vinylidene fluoride‐co‐vinyl dimethyl phosphonate) statistical copolymers with different compositions. Such copolymers are obtained by conventional radical copolymerization of vinylidene fluoride (VDF) with vinyl dimethyl phosphonate (VDMP) initiated by peroxides. A morphological study of the obtained solid polymer electrolytes (SPEs) shows that only samples prepared from the copolymer with the lower amount of VDMP (16 mol%) result in the formation of homogeneous electrolytes while aggregates of lithium salts are observed for the other copolymers. The best ionic conductivity values are accordingly observed for the copolymers with the lower VDMP amount and are reaching 5 × 10−3 mS cm−1 at 100 °C. The dependence of the ionic conductivity versus temperature suggests that the ionic conductivity is controlled by the motion of polymer segments. Indeed, the ionic conductivity can be increased by adding a small amount of trimethylphosphate plasticizer and can reach 1.9 × 10−2 mS cm−1 at 20 °C. Finally, the prepared SPEs exhibit a high electrochemical stability and a good resistance to flame because of the presence of fire‐retardant phosphate groups in their structure.