Effects of Surface Acidity and Polarity of SiO2 Nanoparticles on the Foam Stabilization Applied to Natural Gas Flooding in Tight Gas-Condensate Reservoirs

Foams in the oil and gas industry have been used as divergent fluids to attenuate the fluid channeling in high-permeability zones. Commonly, foams are generated using a surfactant solution in high-permeability reservoirs, which exhibit stability problems. Therefore, the main objective of this study is to stabilize the foams by the addition of modified silica nanoparticles, varying the surface acidity and polarity for natural gas flooding in tight gas-condensated reservoirs. Four types of modified silica-based nanoparticles with varying surface acidity and polarity (coated with vacuum residue) were synthesized and evaluated using surfactant adsorption. The basic nanoparticles exhibited a greater adsorption capacity of the surfactant, reaching an adsorbed amount of approximately 200 mg of surfactant per gram of nanoparticles, and Type I adsorption behavior. Foams were generated and evaluated based on their stability using two routes, namely, (1) with mechanical agitation and (2) methane flooding, to determi...