Measurement of soil water content using the combined time-domain reflectometry - thermal conductivity probe

A two-pronged metal probe measures the thermal conductivity and apparent dielectric constant of soils in the laboratory and in the field. One prong acts as a transient line heat source probe in measuring thermal conductivity. The apparent dielectric constant of the soil is determined by the time-domain reflectometry (TDR) technique, using both prongs as a parallel transmission line. Volumetric water content is determined from the apparent dielectric constant, making use of an empirical relation valid for most soils. For volumetric water contents above about 8%, the apparent dielectric constant shows a strong dependence on water content and relatively small changes can be measured; sensitivity increases with water content. For volumetric water contents less than 8%, a soil-dependent empirical relation between water content and thermal conductivity has been developed that is most sensitive at lower water contents. The combined probe provides a means of monitoring the water content of soils over a wide range of values, in the field and in the laboratory.