Computational-Fluid-Dynamics-Based Design Optimization for Single-Element Rocket Injector

A computational-fluid-dynamics-based design optimization approach, utilizing the response surface method, has been proposed for a single-element rocket injector. The overall goal of the effort is to demonstrate the integration of a set of computational and optimization tools to enable the injector designer to objectively determine the trades between performance and life during the design cycle. Using design of experiment techniques, 54 cases are selected, and computational solutions based on the Navier‐Stokes equations, finite rate chemistry, and the k‐e turbulence closure are obtained. The response surface methodology is employed as the optimization tool. Four independent design variables are selected, namely, H2 flow angle, H2 and O2 flow areas with fixed flow rates, and O2 posttip thickness. Design optimization is guided by four design objectives. The maximum temperature on the injector element oxidizer posttip, the maximum temperature on the injector face, and a combustion chamber wall temperature are chosen as life indicators. The length of the combustion zone is selected as an indicator of mixing and performance. In the context of this effort, the design optimization tools performed efficiently and reliably. In addition to establishing optimum designs by varying emphasis on the individual objectives, better insight into the interplay between design variables and their impact on the design objectives is gained. The need to include environmental design objectives early in the design phase is clearly established.