Determination of trace uranium by resonance fluorescence method coupled with photo-catalytic technology and dual cloud point extraction.
2016
Abstract In this paper, two kinds of salophens (Sal) with different solubilities, Sal1 and Sal2, have been respectively synthesized, and they all can combine with uranyl to form stable complexes: [UO 2 2 + -Sal1] and [UO 2 2 + -Sal2]. Among them, [UO 2 2 + -Sal1] was used as ligand to extract uranium in complex samples by dual cloud point extraction (dCPE), and [UO 2 2 + -Sal2] was used as catalyst for the determination of uranium by photocatalytic resonance fluorescence (RF) method. The photocatalytic characteristic of [UO 2 2 + -Sal2] on the oxidized pyronine Y (PRY) by potassium bromate which leads to the decrease of RF intensity of PRY were studied. The reduced value of RF intensity of reaction system (Δ F ) is in proportional to the concentration of uranium ( c ), and a novel phot o -catalytic RF method was developed for the determination of trace uranium (VI) after dCPE. The combination of phot o -catalytic RF techniques and dCPE procedure endows the presented methods with enhanced sensitivity and selectivity. Under optimal conditions, the linear calibration curves range for 0.067 to 6.57 ng mL − 1 , the linear regression equation was Δ F = 438.0 c (ng mL − 1 ) + 175.6 with the correlation coefficient r = 0.9981. The limit of detection was 0.066 ng mL − 1 . The proposed method was successfully applied for the separation and determination of uranium in real samples with the recoveries of 95.0–103.5%. The mechanisms of the indicator reaction and dCPE are discussed.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
31
References
14
Citations
NaN
KQI