Rotary type oil pumping unit installation base

A rotary type oil pumping unit installation base is formed by a fixed disk, a weight assembly A, a movable disk, through guide grooves, a weight assembly B, location bolts, a pressing nut and rollers. The rotary type oil pumping unit installation base is characterized in that the fixed disk is fixed by the weight assembly A, the certain number of grooves is arranged on the fixed disk, three location bolts are evenly distributed and welded on the fixed disk, the roller is installed in the grooves, the movable disk is matched with the fixed disk and the roller, three through guide grooves are evenly distributed on the movable disk, an angle occupied by each through guide groove is 100 degrees, the three location bolts are respectively matched in the three through guide grooves, the pressing nut is matched with the location bolts to fix or loosen the movable disk, and the weight assembly B is positioned on the movable disk to be used for fixedly installing an oil pumping unit on the movable disk. The rotary type oil pumping unit installation base has the advantages of being simple in structure and good in operability. In well repairing operation, operators only need to rotate a machine of the oil pumping unit and don't need to climb at the top of the oil pumping unit, and large lifting equipment is prevented from being used. Therefore, safety of well repairing operation is improved, and cost of the well repairing operation is reduced.