Experimental validation of a broadband pentamode elliptical-shaped cloak for underwater acoustics

Abstract In this paper we report the numerical design and experimental validation of a pentamode cloak for scattering reduction of elliptical targets in underwater acoustics. Despite being a well-known theoretical concept, experimental validations of transformation-based acoustic cloaking for non-axisymmetric targets have been hindered due to the difficulties related to the complexity of the required material distribution. We overcome these by adopting a linear quasi-symmetric map defined in elliptic coordinates that allows for the design of a pentamode cloak with constant anisotropic elasticity and a scalar inhomogeneous density. We then perform the long-wavelength homogenization based optimization of unit cells that implement the computed material distribution. Numerical validations allow to assess the working range of the designed microstructure, which depends solely on the ratio between the wavelength and the size of the microstructure, and is thus expressed in terms of the maximum normalized wavenumber κ L c , being L c the characteristic length of the considered unit cell. The influence on the scattering performance of the cloak of a pentamode bandgap common to all the cells in the microstructure is also discussed, finding that it is actually detrimental for the scattering reduction. Finally, the specimen is fabricated and experimentally tested over the range 0 . 45 κ L c 1 . 34 .