BEP & MAPPING PROCESS FOR THE RESTORATION BUILDING SITE
2019
Abstract. The BEP, acronym for BIM Execution Plan, consists of the information management plan created by the design team to illustrate how to meet the requirements defined in the Employer's Information Requirement (EIR). The big amount of data will have to be organized a priori both for the professionals who will use that piece of information and for the stakeholders who will have to receive only the right information and use specific worksets. Just at this stage, the heart of the BIM method, there are different advantages compared to the traditional process, in which these informational steps were omitted, causing errors, delays and therefore an increase in active and passive costs. This paper explores the methodology applied to the mapping process of the management of a recovery site. For a better understanding of the result achieved, the stages of the process have been explained, from the acquisition of data, through the scan to BIM process up to the construction phases. In addition, the phases (Identify BIM goal and uses, Design BIM Project Execution Process, Develop information exchange) and the steps (Investigation, Identification and Strategy) necessary to achieve the objective have been analyzed. This is the Lean construction and Integrated Project Delivery (IPD), methodologies and systems that allow the improvement of the building process thanks to data sharing and communication between stakeholders before work begins so as to eliminate any possible delay.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
3
References
1
Citations
NaN
KQI