Effect of Silicon Surface for Perovskite/Silicon Tandem Solar Cells: Flat or Textured?

Perovskite and textured silicon solar cells were integrated into a tandem solar cell through a stacking method. To consider the effective structure of silicon solar cells for perovskite/silicon tandem solar cells, the optic and photovoltaic properties of textured and flat silicon surfaces were compared using mechanical-stacking-tandem of two- and four-terminal structures by perovskite layers on crystal silicon wafers. The reflectance of the texture silicon surface in the range of 750–1050 nm could be reduced more than that of the flat silicon surface (from 2.7 to 0.8%), which resulted in increases in average incident photon to current conversion efficiency values (from 83.0 to 88.0%) and current density (from 13.7 to 14.8 mA/cm2). Using the texture surface of silicon heterojunction (SHJ) solar cells, the significant conversion efficiency of 21.4% was achieved by four-terminal device, which was an increase of 2.4% from that of SHJ solar cells alone.