Automatic Analysis of ACR Phantom Images in MRI

2019 
BACKGROUND Quality Assurance (QA) of Magnetic Resonance Imaging (MRI) system is an essential step to avoid problems in diagnosis when image quality is low. It is considered a patient safety issue. The accreditation program of the American College of Radiology (ACR) includes a standardized image quality measurement protocol. However, it has been shown that human testing by visual inspection is not objective and not reproducible. METHODS The overall goal of the present paper was to develop and implement a fully automated method for accurate image analysis to increase its objectivity. It can positively impact the QA process by decreasing the reaction time, improving repeatability, and by reducing operator dependency. The proposed QA procedures were applied to ten clinical MRI scanners. The performance of the automated procedure was assessed by comparing the test results with the decisions made by trained MRI technologists according to ACR guidelines. The p-value, correlation coefficient of the manual and automatic measurements were also computed using the Pearson test. RESULTS AND CONCLUSION Compared to the manual process, the use of the proposed approach can significantly reduce the time requirements while maintaining consistency with manual measurements and furthermore, decrease the subjectivity of the results. Accordingly, a strong correlation was found and the corresponding p-value was much lower than the significance level of 0.05 indicating a good agreement between the two measurements.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    0
    References
    0
    Citations
    NaN
    KQI
    []