Influence of dimensional factors and heat treatment on permanent deformation of wrought wire clasps.

: The purpose of this study is to examine the fatigue profiles of wrought wire clasps during the clinical use. Cobalt-chromium-nickel alloy wires were bent into circular beams, which dimensions and fabrication methods were similar to the clinical cases. Deflections of 0.5 mm in a normal direction were applied 10,000 times to the tips of clasp arm and permanent deformations were measured. The following results were obtained. 1) The clasp arms with larger cross sectional diameter, shorter length and smaller radius of curvature showed larger amounts of permanent deformation. 2) The amounts of permanent deformation of the clasp arm remarkably decreased by electric resistance soldering and decreased further more by heat treatment at 500 degrees C for 10 minutes after soldering regardless of the number of deflection. From the results of this study, it was concluded that dimensional factors and heat treatment influenced the permanent deformation of the wrought wire clasps remarkably. Therefore, considering these factors, wrought wire clasps could be designed to reduce permanent deformation.