A polymer gel electrolyte with an inverse opal structure and its effects on the performance of quasi-solid-state dye-sensitized solar cells

Abstract To make the use of dye-sensitized solar cells (DSCs) practical, improvements in their light harvesting and power conversion efficiencies (PCEs) are needed. Hybrid polymer gels with an inverse opal structure (IOS) are prepared using various SiO 2 opal films as templates and subsequent template etching. The polymer gel is further used as a host to prepare gel electrolytes with a photonic band gap (PBG), based on which quasi-solid-state DSCs are fabricated. The current–voltage curves indicate higher PCEs for the gel electrolytes with IOS than for reference gel electrolytes. A maximum average PCE of 3.85% is achieved for the gel electrolytes with a PBG around 690 nm, which is ca. 10% higher than the value for the reference gel electrolyte (3.48%). The action spectra reveal increases in the incident photo-to-current conversion efficiencies in and/or away the PBG region, indicating the significance of IOS for light-harvesting and PCE enhancement by back scattering and reflection of light. The electrochemical impedance spectra further demonstrate that the gel electrolytes with IOS have a lower Warburg impedance value than the reference gel electrolyte, which may also have contributed to the observed PCE enhancement. Besides, the IOS is found to give more stable performance of DSCs.