Ultra-Stiff Graphene Foams as Three-Dimensional Conductive Fillers for Epoxy Resin

Conductive epoxy composites are of great interest due to their applications in electronics. They are usually made by mixing powdered conductive fillers with epoxy. However, the conductivity of the composite is limited by the low filler content because increasing filler content causes processing difficulties and reduces the mechanical properties of the epoxy host. We describe here the use of ultra-stiff graphene foams (uGFs) as three-dimensional (3D) continuous conductive fillers for epoxy resins. The powder metallurgy method was used to produce the dense uGFs monoliths that resulted in a very high filler content of 32 wt % in the uGF–epoxy composite, while the density of epoxy was only increased by 0.09 g/cm3. The composite had an electrical conductivity of 41.0 ± 6.3 S/cm, which is among the highest of all of the polymer-based composites with non-conductive polymer matrices and comparable with the conductive polymer matrices reported to date. The compressive modulus of the composite showed a remarkable i...