Qatalum's 1st Cut Spl; Treatment And Applications

Spent Pot Lining (SPL) is produced in thousands of tons annually as a waste from the aluminum industry. SPL is classified into two types, 1st and 2nd Cut SPL. The 1st cut, which is the material under investigation in this study, is a contaminated graphite/ceramics material (50 - 60% of graphite) that is used in lining the electrolytic cell within which aluminum is produced by the reduction of molten Al2O3. 1st Cut SPL is considered as a hazardous material since it contains many other contaminants such as fluorides, cyanides, lead and chromium in addition to its production of flammable gases when it comes in contact with water e.g. ammonia, phosphine, hydrogen and methane. The aim of this study is threefold: (i) fully characterize the 1st Cut SPL produced by Qatalum in Qatar to help in creating the materials safety data sheet (MSDS), (ii) chemically treat this 1st Cut SPL in order to extract the graphite component to use it in other applications in addition to the Cryolite and finally (iii) use the extract...