The Inundation Simulation for Inland by River Hydraulic Structures

A local rain that is concentrated in specific area in a short time frequently occurs due to recent abnormal weather. To prevent potential flood disasters, therefore, it is necessary to be established to the flood control system. Checking the river design standard, however, hydrologic design frequency of water gate is only marked as over 20 years, so this fact shows that the standard is unclear. The inland inundation modeling considering the stage in a river and quantitative assessment are required to reduce flood damage. The simulation for internal inundation is very complex and is time-consuming due to considering hydraulic hydrology characteristics at the same time. Using the already established river master plan, consequently, this study proposed the simple and convenient method for assessment of the internal inundation simulation. Using the proposed method in the upper and middle regions of a river, influences for design frequency or water gate location were assessed by applying the nine probability precipitation with design frequency and by targeting the water gates which are installed in five inlands.