Mechanical Stimulation of Tissue Repair in the Hydraulic Bone Chamber

A hydraulically activated bone chamber model was utilized to investigate cellular and microstructural mechanisms of mechanical adaptation during bone repair. Woven trabecular bone and fibrotic granulation tissue filled the initially empty chambers by 8 weeks postimplantation into canine tibial and femoral metaphyses. Without mechanical stimulation, active bone remodeling to lamellar trabecular bone and reconstitution of marrow elements were observed between 8 and 24 weeks. In subsequent loading studies, the hydraulic mechanism was activated on one randomly chosen side of 10 dogs following 8 weeks of undisturbed bone repair. The loading treatment applied an intermittent compressive force (18 N, 1.0 Hz, 1800 cycles/day) for durations of a few days up to 12 weeks. Stereological analysis of three-dimensional microcomputed tomography images revealed an increase in trabecular plate thickness and connectivity associated with the loaded repair tissue microstructure relative to unloaded contralateral controls. These microstructural alterations corresponded to an over 600% increase in the apparent modulus of the loaded bone tissue. A significant increase in the percentage of trabecular surfaces lined by osteoblasts immunopositive for type I procollagen after a few days of loading provided further evidence for mechanical stimulation of bone matrix synthesis. The local principal tissue strains associated with these adaptive changes were estimated to range from approximately −2000 to +3000 μstrain using digital image-based finite element methods. This study demonstrates the sensitivity of bone tissue and cells to a controlled in vivo mechanical stimulus and identifies microstructural mechanisms of mechanical adaptation during bone repair. The hydraulic bone chamber is introduced as an efficient experimental model to study the effects of mechanical and biological factors on bone repair and regeneration.