Acceleration of 500 keV Negative Ion Beams By Tuning Vacuum Insulation Distance On JT-60 Negative Ion Source

Acceleration of a 500 keV beam up to 2.8 A has been achieved on a JT‐60U negative ion source with a three‐stage accelerator by overcoming low voltage holding which is one of the critical issues for realization of the JT‐60SA ion source. In order to improve the voltage holding, preliminary voltage holding tests with small‐size grids with uniform and locally intense electric fields were carried out, and suggested that the voltage holding was degraded by both the size and local electric field effects. Therefore, the local electric field was reduced by tuning gap lengths between the large size grids and grid support structures of the accelerator. Moreover, a beam radiation shield which limited extension of the minimum gap length was also optimized so as to reduce the local electric field while maintaining the shielding effect. These modifications were based on the experiment results, and significantly increased the voltage holding from <150 kV/stage for the original configuration to 200 kV/stage. These techni...