A Cross-Flow Model for Continuous Plug Flow Fluidized-Bed Cross-Flow Dryers

Plug flow fluidized bed cross-flow dryers have been used in drying of particulate solids such as paddy and other grains for many years. However, simulation of the performance of any particular design of the dryer has always been problematic due to the inadequate overall empirical models used that are too inflexible and too specific to the particular design. In addition, previous theoretical models of the plug flow fluidized bed cross-flow dryer did not model the gas cross flow properly and had difficulty in modeling the moving solid bed. A new steady-state cross-flow model of the dryer that models the gas cross-flow is proposed. The profiles for the solids and air moisture contents and temperatures were found to be dependent on the gas-solid flow ratio, G/F, the specific heat demand, C PY (T I  − T A )/(Y E  − Y I ), the total number of a transfer units, N T  = Ge/KφaSL and the specific drying load, (X I  − X P )/ (Y E  − Y I ). The model was validated by comparing the simulated data with experimental dat...