Optimization of Lead Free Plating for Flip Chip Applications

Traditional flip chip processes have consolidated to a SnAgCu (SAC) solder system. Each company based upon their own needs and application space has come to their own method to achieve the desired final composition of the interconnect. These have included different solder compositions for both the pre-solder and the C4. The various interconnect solutions can range from no solder on one side such as pure Cu or Ni to an interconnect that has identical solder composition for both the substrate and the C4. Decisions for the optimized solution include the need for reliability, cost and yield. Picking the right solution also enables the elimination of defects such as solder voids, interfacial voids, white bumps, micro-solder bumps and non-wets. The optimized solutions are dependent upon many factors that include the fragility of the silicon dielectric, the size of the die, type of flux used at assembly, the assembly process used, method by which SnAg is plated such as various layering techniques, final processe...