Demonstration of polarisation calibration with the LBA on Selected AGNs

We present here the results from a full polarisation study, an important VLBI capability, of a selected set of bright Active Galactic Nuclei (AGNs), along with the steps required to fully calibrate the Australian Long Baseline Array. We compare strategies for high-precision polarisation measurements using two polarisation correction methods: (1) Linear model and (2) Ellipticity-Orientation model and two data-recording techniques: recording (1) nominally circular polarisation at all stations and (2) mixed polarisation, where all but one station record circular polarisation and the other recorded linear polarisation. The latter is corrected post-correlation. We explored these possible solution to discover which will best accommodate the heterogeneous nature of the Australian Long Baseline Array without impacting on the science results. The targets, all compact and of low polarisation fraction, allow us to compare multiple independent solutions for polarisation characteristics. The results show that the agreement between the two polarisation correction models is excellent. However, the values from Mopra with nominally circular polarisation are larger than would be acceptable. However, we also demonstrate that recording mixed polarisation modes and correcting post-correlation provide a high quality polarisation product. We report on the detailed tests of these strategies and assess that the array is ready for full polarisation operation.