Experimental Investigation of Oil Recovery Performance and Permeability Damage in Multilayer Reservoirs after CO2 and Water–Alternating-CO2 (CO2–WAG) Flooding at Miscible Pressures

Blockage in reservoirs caused by asphaltene deposits and inorganic interactions is a serious problem that may exacerbate the complexity of displacement characteristics in heterogeneous multilayer sandstone reservoirs and affect crude oil recovery performance during CO2 and CO2–WAG flooding. In this study, experiments of both CO2 and CO2–WAG flooding were carried out on the same multilayer systems under miscible conditions (70 °C, 18 MPa). The two flooding methods were evaluated for oil production performance and reservoir damage. The experimental results indicate that, after CO2 flooding, the entire system has a low oil recovery factor (RF) of 27.6%, and oil is produced mainly from the high permeability layer (91.4%), while the residual oil remains predominantly in the medium and low permeability layers. The injection pressure of CO2–WAG flooding is high, but the timing of CO2 breakthrough (BT) is late, and the oil RF of the entire system reaches 44.5%. The contribution rate of oil production in medium an...