Ag-polyaniline nanocomposite cladded planar optical waveguide based humidity sensor

The paper reports synthesis of Ag-polyaniline nanocomposite and its evaluation as an active optical cladding on a planar optical waveguide (POW) as a humidity sensor with variable concentration of the composite. The nanocomposite is dispersed in acetonitrile, and spin coated on the planar waveguide to form a clad. The system shows response to humidity, when tested in the range of 20–92% relative humidity (RH). A prism film coupling is used to characterize the cladded waveguide. The maximum sensitivity is seen for 47% concentration of the nanocomposite in acetonitrile. The response and recovery of the sensor are 8 and 55 s respectively. The low hysteresis is exhibited by the sensor. The sensor has repeatability and reproducibility. Material characterization is done using Scanning Electron Micrograph (SEM), X-Ray Diffraction (XRD), Ultraviolet Spectroscopy (UV) and Fourier Transform Infrared Spectroscopy (FTIR).