Ultralow-power SRAM technology
2003
An ultralow-standby-power technology has been developed in both 0.18-µm and 0.13-µm lithography nodes for embedded and standalone SRAM applications. The ultralow-leakage six-transistor (6T) SRAM cell sizes are 4.81 µm2 and 2.34 µm2, corresponding respectively to the 0.18-µm and 0.13-µm design dimensions. The measured array standby leakage is equal to an average cell leakage current of less than 50 fA per cell at 1.5 V, 25°C and is less than 400 fA per cell at 1.5 V, 85°C. Dual gate oxides of 2.9 nm and 5.2 nm provide optimized cell leakage, I/O compatibility, and performance. Analyses of the critical parasitic leakage components and paths within the 6T SRAM cell are reviewed in this paper. In addition to the well-known gate-oxide leakage limitation for ULP technologies, three additional limits facing future scaled ULP technologies are discussed.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
23
References
44
Citations
NaN
KQI