Performance evaluation of GaN light-emitting diodes using transferred graphene as current spreading layer

This study elucidates the correlation among conductivity of graphene and interface aspects in GaN light-emitting diodes (LEDs). Using a multilayer graphene of low sheet resistance, it is demonstrated that graphene alone can make ohmic contact with p-GaN without necessitating additional interlayer. Large-area blue LED with relatively low contact resistance in the order of 10−2 ohm-cm2 and improved forward voltage of 3.2 ± 0.1 V was realized irrespective of the use of the interlayer. The results from parallel evaluation experiments performed by varying the layer numbers of graphene with ultrathin NiOx interlayer revealed that the poor lateral conductivity of monolayer or few layer graphene can be well compensated by the interlayer. A combination of three layer graphene and NiOx offered device with enhanced electro-optical performance. But the Schottky barrier associated with the inadequate adhesion of transferred graphene dominates all the benefits and becomes a major bottleneck preventing the formation of ...