Analysis and Design of Multi-storeyed building using Autodesk Robot Structural Analysis Professional 2016

2016 
Today all the structures even from 10m to the large sky scrapers like the BhurjKhalifa are designed with the help of software's to save time, achieve precession, bring economy and optimization. This leads us to design the multi storey building using Autodesk Robot Structural Analysis Professional 2016.The project consists of the design of multi-storey (G+10) building using Autodesk Robot Structural Analysis Professional 2016. The main objective of the project is to analyze the building for different load conditions and then design the structure to sustain these loads by some margin of safety. To fulfill these objectives, the irregular shaped residential building was taken for study. The location for this project is considered as Pune. The modal of whole building was developed in Autodesk Robot Structural Analysis 2016, then the loads are applied according to Indian Standards (IS 875(Other than seismic) and IS 1893(Seismic)). The behavior of the structure was then examined and analyzed in the software and finally the various structural members were designed accordingly. At last the random sample members were checked by manual calculations Keywords— seismic analysis, base shear ,deflection, story, drift I. INTRODUCTION In current century the large number of land parcels are get converted into pro parties due to large population that is horizontal space is now getting exhausted completely. Now the situation is arisen that almost 90% useful land is covered with the development of infrastructures but still peoples are in search of shelter because the horizontal development proves to be inadequate for such a huge population. This leads to the idea that there is infinite space in vertical direction which can be used freely but the job was not as simple as it seems. But structural engineers make it possible and developed the structure from 20m height to 820m height. This development is not only for breaking the record but also for making the strong enough h safe structure which can prevent the loss from natural calamities, environmental conditions, terrorist attacks, etc. This cannot be done until proper analysis of structure which is to be brought in real life. Analysis is not enough alone, with that proper design is also important. Hence the design and analysis are the scientific art of evaluating the all possible worst condition that structure can face during its life cycle and finding the solution to prevent the structure from the effect of these conditions by deciding some structural geometries inside the structure. 1.1 Software available choice of software Now a days accuracy is not the problem as all software's give fair results and hence the accuracy of the results became secondary criteria to choose the software package. The selection of software application is mainly based on the unique features it offers, reputation, service, and support to the local conditions. Also the software's are not cheap in cost and hence firm has to invest high capital in software's, hence the value of software is very essential thing. Hence the software which offers more features in same cost are look forward for selection. The software's available in market for analysis and design are ETABS, SAP, Robot Structural Analysis, Staad Pro, RISA 3D, CSC Struds, Nucleus RC 3D, NISA, Tekla Structural Designer, etc.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    2
    References
    0
    Citations
    NaN
    KQI
    []