Sources of anammox granular sludge and their sustainability in treating low-strength wastewater

Abstract Anaerobic ammonium oxidation (anammox) has been widely applied in the treatment of high-strength nitrogen wastewaters. However, few engineering practices were reported to treat low-strength nitrogen wastewaters. In this study, three types of anammox granular sludge (GS) were separately collected from the expanded granular sludge bed (EGSB) reactors treating nitrogen wastewaters at high (H-), moderate (M-) and low (L-) nitrogen loading rates (NLRs), and employed for the treatment of low-strength nitrogen wastewater in sequencing batch advanced nitrogen removal (ANR) systems. The ANR system with M-GS (namely M-ANR system) was most useful. At the initial biomass concentration of 2.43 g-VSS·L −1 , cycle length of 8 h and influent total nitrogen (TN) concentration of less than 15 mg·L −1 , the performance data were as follows: effluent TN of less than 1 mg·L −1 , TN removal efficiency of more than 92.8%, the nitrogen removal rate (NRR) of 0.039 kg-N·m −3 ·d −1 . The efficient performance lasted as long as 46 cycles, indicating the sustainability of the M-ANR system. The advanced microscopic analysis and metagenomic analysis were applied to reveal the successful but non-permanent treatment by the M-ANR system. The long-time lag between biomass decay and sludge activity decay provided a window period for the good performance of M-ANR system. However, the weak support of oligotrophic habitat for anaerobic ammonium oxidizing bacteria community was doomed to the degradation of anammox GS, resulting in gradual loss of their activities. A periodic addition of fresh M-GS or a periodic rejuvenation cultivation in the eutrophic habitat is necessary to achieve a permanent performance.