Addition of a small amount of multiwalled carbon nanotubes and flaked graphene to epoxy resin

The paper presents an attempt to evaluate the technically important properties of epoxy resin modified alternatively with multi-walled carbon nanotubes and flaked graphene. It is a presentation of experimental results supported by extensive referring to the professional literature. The nano-components were added in the amount which was economically justified and provides hope for a significant improvement of some of the properties of pure resin. Flowability, glass wettability, curing process and gelation time and curing shrinkage of the resin were evaluated. After the resin was cured, inner and outer hardness, thermal conductivity, flexural strength and impact resistance were measured. Glass fibre-reinforced laminates were also prepared with use of the nano-modified resin. The mechanical properties, interlaminar shear strength and flexural strength of the laminates, were evaluated for them. The obtained results showed either no effect or only technically slight effect of the nano-modification on the evalu...