A V-band front-end with 3-D integrated cavity filters/duplexers and antenna in LTCC technologies

This paper presents a compact system-on-package-based front-end solution for 60-GHz-band wireless communication/sensor applications that consists of fully integrated three-dimensional (3-D) cavity filters/duplexers and antenna. The presented concept is applied to the design, fabrication, and testing of V-band (receiver (Rx): 59-61.5 GHz, transmitter (Tx): 61.5-64 GHz) transceiver front-end module using multilayer low-temperature co-fired ceramic technology. Vertically stacked 3-D low-loss cavity bandpass filters are developed for Rx and Tx channels to realize a fully integrated compact duplexer. Each filter exhibits excellent performance (Rx: IL < 2.37 dB, 3-dB bandwidth (BW)∼ 3.5%, Tx:IL < 2.39dB,3-dBBW ∼ 3.33%). The fabrication tolerances contributing to the resonant frequency experimental downshift were investigated and taken into account in the simulations of the rest devices. The developed cavity filters are utilized to realize the compact duplexers by using microstrip T-junctions. This integrated duplexer shows Rx/Tx BW of 4.20% and 2.66% and insertion loss of 2.22 and 2.48 dB, respectively. The different experimental results of the duplexer compared to the individual filters above are attributed to the fabrication tolerance, especially on microstrip T-junctions. The measured channel-to-channel isolation is better than 35.2 dB across the Rx band (56-58.4 GHz) and better than 38.4 dB across the Tx band (59.3-60.9 GHz). The reported fully integrated Rx and Tx filters and the dual-polarized cross-shaped patch antenna functions demonstrate a novel 3-D deployment of embedded components equipped with an air cavity on the top. The excellent overall performance of the full integrated module is verified through the 10-dB BW of2.4GHz ( ∼ 4.18%) at 57.45 and 2.3 GHz (∼ 3.84%) at 59.85 GHz and the measured isolation better than 49 dB across the Rx band and better than 51.9 dB across the Tx band.