Cu–Al–Si alloy anode material with enhanced electrochemical properties for lithium ion batteries

The microstructure and electrochemical property of Cu–Al–Si alloy anode material are studied in this paper. The research shows that the alloy particle has a basic circular outline, and two copper-rich phases with different silicon contents are detected in the particle, and both phases with nanostructure are observed in its surface layer. The nano-silicon alloy negative electrode material needs to be used in a certain proportion with graphite, binder and conductive agent, and the stirring process also has an important influence on its electrochemical performance. Multiple mixing can achieve a better cycle retention compared to direct mixing. The first-cycle coulombic efficiency of the electrode material is improved up to about 90%, and the specific capacity is still higher than 500mAhg−1 after 100 cycles. The battery manufacturing process is similar to the graphite negative electrode, so it is easy to be applied.