Two-Dimensional Multiparticle Finite Element Modeling on the Cold Isostatic Pressing of Al Powder

In this article, the cold isostatic pressing (CIP) of Al powders with different initial packing structures was numerically simulated in two dimensions using the multiparticle finite element method from particulate scale. The effects of external pressure and initial packing structures on the packing densification and performance of the compacts were systematically studied. Various macro/micro properties (such as relative density and distribution, local stress and distribution, and particle deformation behavior) and the densification dynamics/mechanisms were characterized and analyzed. Corresponding modeling on die compaction was also conducted for comparison. The results show that the relative displacement of particles is much less and the particle shape is more regular for CIP of ordered initial packing structure than those for CIP of random initial packing structure, and the distributions of relative density and local stress in the compact for the former case are more homogeneous. Compared with die compaction, the formability of CIP is much better; also, the compact has higher relative density and more uniform density and stress distributions. The normal stresses are transmitted in all directions in the compact during CIP because the external load is applied uniformly to the outer surface of the rubber mold from all directions in the entire process, while the normal stresses are directional along the loading path during die compaction.