Influence of Constitutive Models and the Choice of the Parameters on FE Simulation of Ti6Al4V Orthogonal Cutting Process for Different Uncut Chip Thicknesses

The constitutive model and its pertinent set of parameters are important input data in finite element modeling to define the behavior of Ti6Al4V during machining process. The present work focusses on comparing different constitutive models and the parameters sets available in literatures and investigating the quality of the predictions when varying uncut chip thickness (40 µm, 60 µm, 100 µm and 280 µm). In addition, temperature-dependent strain hardening factor along with strain softening phenomenon based reconstructed material model is proposed. The results from the numerical simulations are compared with experimental results available in literature. The comparison shows that the force values are highly influenced by constitutive models and the choice of parameters sets, whereas the chip morphologies are mainly influenced by the uncut chip thickness and constitutive models. This work justifies the need for an appropriate set of parameters and constitutive model that replicate the machining behavior of Ti6Al4V alloy for different cutting conditions.