Potentiality of the Use of Pyroclastic Volcanic Residues in the Production of Alkali Activated Material

Volcanic rocks have been used for building activity by the inhabitants of important cities located on the slopes of Mt. Etna, Italy. In this paper, the potential use of volcanic residues (code 20 03 03—“Municipal waste” residues from road cleaning in the European Waste Catalogue (EWC)) for the production of alkali activated material, especially devoted to the restoration of buildings belonging to the Baroque Sicilian architecture, was investigated. In particular, large volcanic pyroclastic deposits of recent eruptions considered waste materials were studied and a volcanic paleo-soil, locally named ghiara, widely used for mortars and plaster production in XVII–XVIII century with good pozzolanic features, was also considered. Both volcanic materials were activated using different mixtures of NaOH and Na2SiO3. Furthermore, formulations with different amount of metakaolin addition (10–25 wt%) were prepared due to low reactivity of volcanic materials and to allow the activation at room temperature. X ray diffraction revealed the formation of small quantities of zeolites as a result of the alkali activation process. The mechanical-physical results evidenced that the mechanical strength is strongly dependent on the metakaolin amount (10–38 MPa); accessible porosity average 25% and an average pore diameter of 0.06 µm; water absorption range 9–15%, eluates conductivity in the range 20–350 µS/m. These results confirm the occurring of alkali activation and the good potential for these pyroclastic wastes for valorization in the restoration field.