Effect of duration of rubbing and normal load on friction coefficient for polymer and composite materials

Purpose – The present paper seeks to report the effect of duration of rubbing on friction coefficient for different polymer and composite materials. Variations of friction coefficient and wear rate with the normal load are also investigated experimentally when stainless steel (SS 304) pin slides on different types of materials such as cloth‐reinforced ebonite (commercially known as gear fiber), glass fiber‐reinforced plastic (glass fiber), nylon and polytetrafluoroethylene (PTFE).Design/methodology/approach – A pin on disc apparatus is designed and fabricated. During experiment, the rpm of test samples was kept constant and relative humidity was 70 percent.Findings – Studies have shown that the values of friction coefficient depend on applied load and duration of rubbing. It is observed that the values of friction coefficient decrease with the increase of normal load for glass fiber, nylon and PTFE. Different trend is observed for gear fiber, i.e. coefficient of friction increases with the increase of nor...