The research of the thermal and mechanical properties of materials produced by 3D printing method
2019
A comparative analysis of thermal properties of semi-crystalline and
amorphous polymeric materials was carried out. Samples were produced using
3D printing technology on the SIGNAL-ATMAT printer. The following polymeric
materials were used to make the samples: thermoplastic polyurethane
elastomer, acryloni-trile-butadiene-styrene copolymer, Laywood, ethylene
terephthalate, poly (lactic acid). The materials were tested for their
thermal and mechanical properties. The research included the analysis of
thermal properties by differential scanning calorimetry of manufactured
materials. The tensile strength also was determined.
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
2
Citations
NaN
KQI