Effect of consolidation parameters on mechanical properties of Cu-based bulk amorphous alloy consolidated by hot pressing

Abstract Cu 50 Zr 40 Ti 10 bulk amorphous alloys were fabricated by hot pressing gas-atomized Cu 50 Zr 40 Ti 10 amorphous powder under different consolidation conditions without vacuum and inert gas protection. The consolidation conditions of the Cu 50 Zr 40 Ti 10 amorphous powder were investigated based on an L 9 (3 4 ) orthogonal design. The compression strength and strain limit of the Cu 50 Zr 40 Ti 10 bulk amorphous alloys can reach up to 1090.4 MPa and 11.9 %, respectively. The consolidation pressure significantly influences the strain limit and compression strength of the compact. But the mechanical properties are not significantly influenced by the consolidation temperature. In addition, the preforming pressure significantly influences not the compression strength but the strain limit. The optimum consolidation condition for the Cu 50 Zr 40 Ti 10 amorphous powder is first precompacted under the pressure of 150 MPa, and then consolidated under the pressure of 450 MPa and the temperature of 380 °C.