Reservoir Properties Modeling Using Multi-Attribute Seismic Analysis: Case Study South Sumatra Basin
2021
Abstract. Seismic inversion and multi-attribute analysis method are used in this research to
characterizes the reservoir properties. Where both of these methods will be resulted an
acoustic impedance volume and log property volumes. The property log volumes were
created from density, porosity, Gamma-Ray (GR) and Water Saturation (Sw) log. There are
4 wells that is used in this research, they are EM-31, EM-32, EM-33 and EM-34 and a 3D
seismic data post- stack time migration. Based on a map of acoustic impedance distribution,
the reservoir target has an acoustic impedance value of 6.000 ((m/s)*(g/cc)) to 8.000
((m/s)*(g/cc)). Furthermore, based on the map of the distribution of the log property,
reservoir has a density value with a range of 2.3 g/cc up to 2.4 g/cc, porosity value > 10%,
GR value of less than 100 API and Sw 50% to 55%. Thus, it can be concluded that reservoir
has a lithology of sandstones, has a fairly good porosity and contains oil fluids.
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI