High energy density in P(VDF-HFP) nanocomposite with paraffin engineered BaTiO3 nanoparticles

Abstract Dielectric materials with high energy storage density are attracting scientific and commercial interest due to the prospect of application in advanced electronic devices and electric power systems. Ceramic/polymer composite is one of the most promising materials to obtain high energy density because it combines high permittivity from ceramic and high breakdown strength as well as flexibility from polymer matrix. However, the homogeneous dispersion and compatibility of nanoparticles in polymers matrix are still of great challenges due to the different surface energy between inorganic fillers and organic polymer matrix. Interfaces modification for ceramic fillers is an effective way to ease the mentioned problems. Herein, we proposed a low-cost and environmentally friendly route to prepare a core–shell structure by paraffin engineer the BaTiO 3 nanoparticles. The modified BaTiO 3 nanoparticles exhibited homogeneous dispersion in the ferroelectric polymer poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) matrix and strong interfacial adhesion with the polymer matrix. The nanocomposites prepared in this work showed notably enhanced energy storage density. The maximum storage energy density of the nanocomposite with 50 vol% BaTiO 3 increased to 21.1 J/cm 3 at 150 kV/mm. These results indicate that paraffin is an effective modifier to prepare high energy storage density capacitor.