Tensile fracture characterization of braze joined copper-to-CFC coupon assemblies

Abstract A vacuum brazing process was used to join a broad spectrum of carbon-fiber reinforced carbon matrix composite (CFC) materials, machined into cylindrical coupons, between coupons of oxygen-free copper, the braze alloy was a copper-base alloy which contained only low activation elements (Al, Si, and Ti) relative to a titanium baseline specification. This demonstration was of particular importance for plasma facing components (PFCs) under design for use in the Tokamak Physics Experiment (TPX); the braze investigation was conducted by General Atomics for the Princeton Plasma Physics Laboratory. A tensile test of each brazed assembly was conducted. The results from the braze processing, testing, and fracture characterization studies of this reporting support the use of CFC's of varied fiber architecture and matrix processing in PFC designs for TPX. Further, the copper braze alloy investigated is now considered to be a viable candidate for a low-activation bond design. The prediction of plasma disruption-induced loads on the PFCs in TPX requires that joint strength between CFC tiles and their copper substrate be considered in design analysis and CFC selection.