Designing ultrafine lamellar eutectic structure in bimodal titanium alloys by semi-solid sintering

Abstract We report on a novel approach to design typical ultrafine lamellar eutectic structure in bimodal alloys fabricated by semi-solid sintering (SSS) of a eutectic mixture. In our work, ultrafine lamellar eutectic structure was implemented by controlling the phase composition of eutectic reaction, and consequently by regulating the structure of eutectic reaction-induced liquid phase through varying component number. Microstructure analysis indicate that although all SSSed alloys have the same three phase constitutions of bcc β-Ti, bcc Ti(Fe, Co), and fcc Ti 2 (Co, Fe), the morphology and distribution of the eutectic structure transforms from limited length and minor quantity, to partial fine alternating bcc β-Ti and bcc Ti(Fe, Co) lamellae, and further to typical complete ultrafine alternating continuous lamellae in the SSSed ternary Ti-Fe-Co, quaternary Ti-Fe-Co-Nb, and quinary Ti-Fe-Co-Nb-Al alloys. Interestingly, the SSSed Ti-Fe-Co-Nb-Al alloy presents a novel bimodal microstructure of coarse fcc Ti 2 (Co, Fe) surrounded by an ultrafine lamellar eutectic matrix containing ultrafine bcc β-Ti and bcc Ti(Fe, Co) lamellae. This bimodal microstructure exhibits ultra-high yield strength of 2050 MPa with plasticity in compression of 19.7%, which exceed published values of equivalent materials. Our results provide a novel pathway for fabricating new-structure metallic alloys for high-performance structural applications.