Prediction of the effects of friction control on top-of-rail cracks

Rolling contact fatigue is a major problem connected with railway tracks, especially in curves, since it leads to higher maintenance costs. By optimising the top-of-rail friction, the wear and cracks on the top of the rail can eventually be reduced without causing very long braking distances. There are several research articles available on crack prediction, but most of the research is focused either on rail without a friction modifier or on wheels with and without friction control. In the present study, in order to predict the formation of surface-initiated rolling contact fatigue, a range of friction coefficients with different Kalker’s reduction factors has been assumed. Kalker’s reduction factor takes care of the basic tendency of creepage as a function of the traction forces at lower creepage. The assumed range covers possible friction values from those for non-lubricated rail to those for rail with a minimum measured friction control on the top of the rail using a friction modifier. A fatigue index ...