Preparation and electrical properties of pseudoternary BaTiO3–CaTiO3–BaZrO3 lead free piezoelectric ceramics
2013
Abstract Pseudoternary xBaTiO3–yCaTiO3–(1−x−y)BaZrO3 (BT–CT–BZ) lead free piezoelectric ceramics were prepared by the conventional solid state reaction method sintered at 1450–1510°C for 2 h. Sintering conditions, composition and polarisation conditions exert great influences on structure and electrical properties of the sintered BT–CT–BZ ceramics. The synthesised BT–CT–BZ ceramics exhibit rather large bulk density and densified microstructure morphology, although slight content of pyrochlore phase impurity exists. With increasing CaTiO3 content, crystal structure of the BT–CT–BZ ceramics changes gradually from rhombohedral perovskite structure, across morphotropic phase boundary (MPB) composition and to tetragonal one. The dielectric response character changes successively from broad dielectric peaks to narrow ones accompanied by slight content of dielectric frequency dispersion, whereas the MPB effect is not apparent. The temperature of dielectric constant maximum TC increases almost linearly with incre...
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
16
References
11
Citations
NaN
KQI