Study on the micro-EDM processing characteristics of Ti-6Al-4V alloy with different electrode materials

Ti-6Al-4V alloy has been widely used in industrial fields. Electrical discharge machining (EDM) is a commonly used technology for machining Ti-6Al-4V alloy. During EDM of Ti-6Al-4V alloy, the thermal and physical characteristics of tool electrode have an important influence on processing characteristics. In order to study the influence of different electrode materials on the processing characteristics of Ti-6Al-4V alloy, brass electrode, copper tungsten electrode, and tungsten electrode were used to perform EDM of Ti-6Al-4V alloy. In this paper, electrodes with V-groove array structures were designed to carry out powder mixed electrical discharge machining (PMEDM) of Ti-6Al-4V alloy, and the machining results were evaluated based on four indicators: microstructures morphology, tool electrode wear (TEW), material removal rate (MRR), and recast layer thickness (RLT). The processing results show that copper tungsten electrode is recommended to machine Ti-6Al-4V alloy because it has the highest reproduction rate (75.2%), a smaller TEW (139 μm), the highest MRR (255.39 mm3/min), and a thinner RLT (3.35 μm).