Assessment of Forest Biomass Estimation from Dry and Wet SAR Acquisitions Collected during the 2019 UAVSAR AM-PM Campaign in Southeastern United States

Forest above-ground biomass (AGB) estimation from SAR backscatter is affected by varying imaging and environmental conditions. This paper quantifies and compares the performance of forest biomass estimation from L-band SAR backscatter measured selectively under dry and wet conditions during the 2019 AM-PM NASA airborne campaign. Seven Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) images acquired between June and October 2019 over a temperate deciduous forest in Southeastern United States with varying moisture and precipitation conditions are examined in conjunction with LIDAR and field measurements. Biomass is estimated by fitting a 3-parameter modified Water Cloud Model (WCM) to radiometric terrain corrected SAR backscatter. Our experiment is designed to quantify the biomass estimation errors when biomass models are calibrated and validated on varying acquisition conditions (dry or wet). Multi-temporal estimation strategies are also evaluated and compared with single-acquisition estimation approaches. As an outcome, the experiment shows that the WCM model calibrated and validated on single acquisitions adapts to different soil moisture conditions with RMSD up to 18.7 Mg/ha. The AGB estimation performance, however, decreases with RMSD upwards of 30 Mg/ha when the model is cross-validated on moisture and precipitation conditions different than the calibration conditions. Results confirm that calibrating the model over the multi-temporal data using averaged backscatter or weighted combinations of individual AGB estimates, improves the biomass estimation accuracy up to about 20% at L-band. This study helps design biomass cal/val procedures and biomass estimation algorithms for dense time-series to be collected by low-frequency radar missions such as NASA-ISRO SAR (NISAR) and BIOMASS.