Proper MgO/Al2O3 Ratio in Blast-Furnace Slag: Analysis of Proper MgO/Al2O3 Ratio Based on Observed Data

2020 
With the gradual depletion of high-quality iron-ore resources, ironmaking blast furnaces have gradually shifted to using high-content Al2O3 iron ore. Under this condition, the addition of MgO in the slag is adopted to alleviate operation problems caused by the high content of Al2O3. However, the proper value of the MgO/Al2O3 ratio for blast-furnace slag systems (Al2O3 = 8–25%) is not systematically studied. In this paper, we discuss the proper MgO/Al2O3 ratio on the basis of blast-furnace slag systems under different Al2O3 contents. On the basis of thermodynamics and phase-diagram analysis, it could be concluded that: (1) the MgO/Al2O3 ratio is not limited when Al2O3 in slag is less than 14%, (2) the MgO/Al2O3 ratio is required to be in the range of 0.40–0.50 when Al2O3 in the slag is 15–17%, and (3) the MgO/Al2O3 ratio should be 0.45–0.55 when Al2O3 in the slag is larger than 18%. The proper MgO/Al2O3 ratio value has been established in various industries, and it has achieved significant economic and social benefits.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    10
    References
    3
    Citations
    NaN
    KQI
    []