Performance of Glued-Laminated Timbers with FRP Shear and Flexural Reinforcement

Glued-laminated wood beams (glulams) have low allowable shear stresses relative to competitive engineering wood products such as parallel strand lumber and laminated veneer lumber. For heavily loaded applications such as garage door headers, the lower shear allowable stresses typically necessitate the use of larger glulam members relative to other engineered lumber. This paper reports on experimental research aimed at increasing the shear capacity of glulams. To increase the shear strength, a series of fiber-reinforced polymeric (FRP) pins are inserted into holes drilled transversely across the plies of the glulam. These pins are epoxy-bonded into place after the glulam has been produced. The test results show that the shear strength scatter in the pinned set of glulams is significantly reduced as compared to the unpinned specimens. Two- and three-parameter Weibull estimates of the service-level allowables increases between 40% and 100% for specimen sets reinforced by the FRP pins. The transverse reinforc...