Vanadium-based catalytic fibers for selective reduction of NO by NH3 and their potential use on co-processing of dust and NOx

Abstract This work is dedicated to fabrication of catalytic fibers for the process of selective catalytic reduction of NOx by NH3 (NH3-SCR). By employing vanadium-titanium as main catalytic components, we investigated the effect of different inorganic supports (glass fiber, aluminum silicate fiber and quartz fiber), preparation methods (a sol-gel method and a hydrothermal method) and loading weight of V2O5 on the NH3-SCR performance of catalytic fibers. The catalytic aluminum silicate fiber with 5% vanadium/titanium ratio prepared by a sol-gel method (denoted as V5Ti/AF) showed the best SCR and mass transfer performance. Characterization results indicated that a relatively large surface area, strong acidity, well-dispersed catalyst particles, and good redox and desorption properties derived from the interaction between catalytic components and supports all contributed to the good performance of V5Ti/AF. The pressure drop of catalytic fibers were measured, and the total pressure drop of catalytic fibers and de-dust ceramic membranes was much lower than previously prepared catalytic ceramic membranes, indicating their potential use in the co-processing of dust and gaseous pollutants.