Optical properties of Ge-Sb-Se thin films induced by femtosecond laser
2021
Abstract The germanium antimony selenide (Ge-Sb-Se) film has emerged as an appealing infrared material with good photosensitivity, large nonlinear coefficient and high transmittance in infrared region. In particular, an infrared optical motherboard can be fabricated in the film by femtosecond (fs) laser micromachining. A detailed quantitative structural and optical characterization for 36 different regions in the film induced by fs laser is reported. By adjusting the laser power and scanning speed, different induced regions in chalcogenide films were obtained by laser direct writing. The size of the focused spot was about 0. 3 μ m which was consistent with the distance between two adjacent lines fabricated into the Ge-Sb-Se film with the thickness of 1. 4 μ m . The refractive index of the film was obtained by using the improved Swanepoel method with an accuracy of better than 0.1%. The transmittance, refractive index, absorption coefficient and optical band gap as a function of the power density were obtained. The results showed that the transmittance, refractive index and optical band gap of the film decreased, while the absorption coefficient increased with the increase of laser power and the decrease of translation velocity gradually. Raman spectroscopy indicated that the Ge-Ge bonds in the Ge2Se 6∕2 ethane structure and the Se-Se homopolar bonds in Se μ long chain or in the Se8 ring were reduced after laser irradiation, and more edge-sharing GeSe 4 tetrahedral structures were formed which resulted in the refractive index change of the film. This work should provide a useful guideline for the preparation of versatile photonic devices based on Ge-Sb-Se films.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
43
References
1
Citations
NaN
KQI