Palm oil industrial wastes as a promising feedstock for biohydrogen production: A comprehensive review

Abstract By the year 2050, it is estimated that the demand for palm oil is expected to reach an enormous amount of 240 Mt. With a huge demand in the future for palm oil, it is expected that oil palm by-products will rise with the increasing demand. This represents a golden opportunity for sustainable biohydrogen production using oil palm biomass and palm oil mill effluent (POME) as a renewable feedstock. Among the different biological methods for biohydrogen production, dark fermentation and photo-fermentation have been widely studied for their potential for biohydrogen production due to their ability to apply various waste materials as feedstock, including POME and oil palm biomass. However, the complex structure of oil palm biomass and POME, such as lignocellulosic composition, making limited fermentable substrate available for conversion to biohydrogen. Therefore, proper Pre-treatment and suitable process conditions are crucial for effective biohydrogen generation from these feedstocks. In this review, characteristics of palm oil industrial waste, the process used for biohydrogen production using palm oil industrial waste, their pros and cons, and the influence of various factors have been discussed, as well as a comparison between studies in terms of types of reactors, Pre-treatment, the microbial culture used, and optimum operating condition have been presented. Through biological production, hydrogen production rate up to 52 L-H2/L-medium/h and 6 L-H2/L-medium/h for solid and liquid palm oil industrial waste, respectively, can be achieved. In short, the continuous supply of palm oil production by-product and relatively, the low cost of the biological method for hydrogen production indicates the potential source of renewable energy.